30 Inch DIY Floating Shelves (3 Count)

A long, uninterrupted shelf changes a wall completely. The Homeforia 30-inch floating shelf set gives you that continuous line—above a console, along a desk wall, behind a coffee bar—with no seams and no mid-span support breaking it up. The wood is the point. Each shelf is solid pine—sanded smooth and left completely unfinished, so you control the final look. Stain it to match existing cabinetry, paint it any color, oil it for a natural matte finish, or seal it clear to keep the raw tone. What you will not find is fiberboard or a printed wood-look wrap pretending to be lumber. Strength is where cheap shelves fail. Each shelf carries up to 50 lbs anchored into wall studs, thanks to a heavy-duty metal bracket that slides fully inside the shelf body. Nothing shows from below or the side, so the shelf appears to float while the hardware quietly does the work. At 30 inches wide and 6.5 inches deep, each shelf spans multiple wall studs, which is exactly why a pair can carry a full library of books, a gallery run of framed art, or a line of plants and canisters. Mounted together, the set turns a blank wall into the focal point of the room. The 6.5-inch depth is a deliberate choice. It is sized as a display ledge—deep enough to hold books upright, framed art, potted plants, candles, mugs and everyday bottles, and trim enough that it never juts into a walkway or blocks a sightline. In a bathroom, hallway, or behind a desk, that restraint is the whole point: storage that reads as architecture rather than furniture bolted to the wall. Installation is straightforward: the concealed heavy-duty bracket, screws, and wall anchors are all in the box with clear instructions. Anchor into studs to reach the full 50 lb rating per shelf, or use the included anchors for drywall. Because raw pine is a living material, knots and grain differ between boards and stain can absorb unevenly in places—test your finish on a back edge first. Backed by Homeforia’s satisfaction guarantee.